adhesive coating
英 [ədˈhiːsɪv ˈkəʊtɪŋ]
美 [ədˈhiːsɪv ˈkoʊtɪŋ]
粘附层
双语例句
- When curing temperature below glassy temperature of adhesive coating, bonding strength is reduce with curing extent increase.
固化温度低于胶层的玻璃化温度时，粘接强度随着固化程度的提高而降低。 - The Effect of Filler on Characteristic of the Epoxy Adhesive Coating
碳化硼对环氧胶粘涂层机械性能的影响 - Antifriction adhesive coating is a kind of wear-resistant multi-material coating which uses adhesive to splice antifriction filler particles and to apply it to the surface of the parts.
耐磨胶粘涂层是以胶粘剂粘接耐磨填料，涂敷在件表面上所形成的一种抗磨复合材料涂层。 - Influence of Different Surface Treatment Methods on the Shear Bond Strength of Epoxy Adhesive Coating
不同表面处理方法对环氧胶粘涂层剪切强度影响 - The adhesive coating material for roofs produced By our factory is easy to use and reasonaBly in price, and is recommended By the construction committee as the conqueror of roof-leaking.
本厂生产的屋顶粘合型涂料，使用方便，价格合理，是建设委员会推荐的屋漏克星。 - Study on erosion resistant nano epoxy adhesive coating
环氧胶粘纳米涂层冲蚀磨损性能研究 - This paper studied the effect of cement, montmorillonite and fly ash on epoxy resin adhesive coating. The effect of the different fillers to the anti-corrosion performances of epoxy resin adhesives are also studied.
研究了水泥、蒙脱土（有机化和未有机化）和粉煤灰作为填料在环氧树脂胶粘剂涂层中的作用，讨论了不同填料对胶粘剂的耐蚀性能的影响。 - A constant potential electroplating was conducted with the voltage between 1.8 and 2.0.As the result of the experiment, a uniform, compacted and good adhesive coating was obtained.
在-1.8V～-2.0V的电位范圈内进行恒电位电镀，可得到均匀、致密、结合力好的镀层。 - Two kinds of friction materials formed with adhesive coating and bonding are developed and its application are also introduced briefly.
研制了粘涂法与粘接法2个系列的摩擦材料，介绍了部分应用情况。 - The experimental results show that the relatively poor performance of the oxygen acetylene flame sprayed copper alloy coating is resulted from its weak adhesive coating structures.
研究结果表明：氧乙炔火焰喷涂铜基合金涂层的耐空蚀性能较差，其原因与涂层的结构特性有关； - The adhesive coating is composed of an adhesive and an anticorrosive filler-cast stone powder, which is coated on the surface of structural components to prevent it from corrosion and wear.
铸石胶粘防腐耐磨涂层是以胶粘剂加入防腐填料-铸石粉涂敷于构件表面上所形成的一种具有防腐、耐磨性能的复合材料涂层。 - Under the high-speed work condition, the brittleness of epoxy adhesive coating leads to its bad slurry erosion performance.
但由于环氧树脂胶粘层脆性大，在较高速度的浆体冲蚀工况下，其抗浆体冲蚀磨损性能并不理想。 - The stress changed from compression stress to tensile stress with the Al/ Ni adhesive coating from ceramics coating to steel base;
AlNi过渡层由陶瓷涂层到钢基体，由压应力过渡到拉应力； - The crux of the new technology of steel wires galvanized with molten zinc powder is that by using a lately developed adhesive coating reagent, zinc powder is stuck to the surface of steel wires, and zinc powder is molten and coated onto steel wires after being heated.
本文提出锌粉热镀锌钢丝新工艺，采用新研制的粘镀剂，将锌粉粘附在钢丝表面，加热后使锌粉熔镀到钢丝上。 - In order to understand the viscoelastic characteristics of the coatings and evaluate adhesive quality, the study of the half-infinite metal-adhesive coating structures on similar Rayleigh waves is carried through.
为了解粘接结构中胶粘涂层的粘弹特性，进而评价粘接质量，对半无限金属基底-胶粘涂层结构涂层中的类Rayleigh波传播特性进行了研究。 - Wear Resisting Adhesive Coating and the Analysis of Wear Mechanism of the Coating
耐磨胶粘涂层及其磨损机理分析 - Investigation on Main Properties for Estimating Quality of Adhesive Coating Layer
评价粘涂层使用性能的主要指标研究 - In this experiment nano-and macro-filler were added into epoxy adhesive to increase the relative abrasion resistance ( RAR) of epoxy coating and function of the filler effecting on epoxy adhesive coating.
为了提高环氧粘涂层的耐磨性，本试验通过在环氧胶粘剂中加入纳、微米填料，研究了纳微米填料对环氧胶粘剂涂层耐磨性的影响规律。 - Study on effects of viscoelastic moduli on similar Rayleigh waves propagation in metal-adhesive coating structures
粘弹模量对金属基底-胶粘涂层结构中类Rayleigh波传播特性的影响 - According to the analysis of wearing curve by tests and wear topography by SEM, slurry erosion wear mechanism of modified epoxy adhesive coating was discussed.
浆体冲蚀磨损机制的分析讨论是结合磨损试验获得各种情况下的磨损曲线与扫描电镜观察到的磨损形貌进行分析的。 - Application of Antifriction Adhesive Coating to Coal-Water Pump
耐磨胶粘涂层在煤水泵上的应用 - Research on Eroding Wear of Wear-Resistant Adhesive Coating
耐磨胶粘涂层的冲蚀磨损研究 - The results shown that the slurry erosion wear of adhesive coating is composed of adhesive wear and antiwear filler wear.
结果表明，这种涂层的冲蚀磨损是由粘结剂的磨损和抗磨填料的磨损所组成； - The relation of viscoelastic property and curing technology on adhesive coating was analyzed. When curing temperature above the glassy temperature of adhesive coating, bonding strength is increase with curing extent increase.
分析了胶层的粘弹性与固化工艺的关系，指出当固化温度高于胶层的玻璃化温度时，粘接强度随着固化程度的提高而提高； - It is analyzed of the residual stress generating procedure in adhesive coating layer on the surface of port crane parts for the purpose of surface protection or repairing.
分析了用于港机部件表面保护和修复的涂层中通常存在的内应力的产生过程，认为它是导致涂层早期破坏的主要原因之一。 - Influence of NANO-MMT on the property of epoxy adhesive coating
纳米蒙脱土对环氧树脂胶黏涂层性能的影响 - The fitments include carpentry board, compound floor, office chair, adhesive coating and paint that come from the bookcase.
装修中使用的木工板、复合地板、办公桌椅，以及书柜中使用的胶黏剂、涂料、油漆等都会散发出甲醛。 - In modern industries, adhesive has a wide range of applications in various fields. A special adhesive is used to bond optical connector in electronic industry, the performance of product is closely related to adhesive coating and drying film-forming process.
胶粘剂在现代工业各领域中有着广泛的应用，电子工业中使用特种胶粘剂来粘结光学接件，产品使用效果跟胶粘剂涂布和干燥成膜过程密切相关。 - The main factors to impact peel strength have hot melt adhesive coating weight in the fabric, coating uniformity, the transfer and molten state of hot melt adhesive particles and so on.
影响剥离强度的主要因素有热熔胶在基布上涂布量的大小、涂层分布的均匀性、胶粒的转移情况及熔融状态等。